Manual Fuel Transfer Pump Kit
Quantity
High Flow Hand Pump: With 1.2m D21mm durable thickened clear PVC pipe, oil, high temperature and corrosion resistant make this pump transfer more quickly, pump 10L/Min.
Easy To Use: Built-in outlet and inlet valve to prevent backflow, extraction directly, liquid outflow in 5 seconds. The arrow indicates flow direction.
Multi-function: Lightweight and portable hand transfer pump, perfect for vehicle without anti-theft filter net, such as lawn mower, brush cutter, hedge trimmer, etc.
Wide Usage: This manual water pump is for fuel petrol crude oil gasoline oil water and other common liquid, also can be a water changer for fish tank at your home.
Note: The fluid you are trying to extract has to be HIGHER than the influent bucket. The fitting end must be kept inside of the fluid not just on the surface.
📌 The Way To Use: 1. Keep the arrow on the sphere down. 2. Insert the upper tube into the fuel tank. 3. Insert the lower tube into the container. 4. Pinch the rubber ball 3-5 times. 5. Liquid outflow.
⚠️ Warm Tip: The fluid you are trying to extract has to be HIGHER than the influent bucket. There's a mark "arrow" on the surface of hand. The fitting end must kept inside of the fluid not just on the surface. To extract the oil in the fuel tank of the car, there must be no anti-pumping filter in the fuel tank.
Colour: Black / transparent | Material: PVC
Package Content: 1 x Good suction sphere, 1 x Hose, 2 x Valve Clip
